×

TLV431AIDBZR Detailed explanation of pin function specifications and circuit principle instructions

blog2 blog2 Posted in2025-03-16 02:24:29 Views2 Comments0

Take the sofaComment

TLV431AIDBZR Detailed explanation of pin function specifications and circuit principle instructions

The "TLV431AIDBZR" you mentioned is a product from Texas Instruments (TI), a well-known semiconductor company. The device is a voltage reference that is typically used in various applications that require precise voltage regulation.

Now, to fulfill your request fully, I’ll provide detailed information on the pin functions and the circuit principle, covering the package and the pinout for this specific model. I’ll also include a detailed FAQ with at least 20 common questions and answers about the device.

TLV431AIDBZR Pinout and Functions

Package Type: The TLV431AIDBZR comes in a SOT-23-5 package (5-pin package). Pinout Details:

Here is the pinout for the TLV431AIDBZR package (SOT-23-5):

Pin Number Pin Name Description 1 Anode (A) Input pin for the reference voltage. This is where you provide a voltage reference for the device. 2 Cathode (K) Output pin that provides the regulated reference voltage. 3 Ref (R) Reference input. This pin is used to set the reference voltage for the regulation. 4 N.C. (Not Connected) This pin is not internally connected to any part of the IC, it is unused in this package. 5 Ground (GND) Ground pin for the IC.

Circuit Principle Overview:

The TLV431AIDBZR is a shunt voltage reference. It operates as a low dropout voltage regulator, providing a stable output voltage that is set by an external resistor network. This voltage reference is commonly used in applications requiring precise voltage regulation, such as in analog-to-digital converters (ADC) or voltage regulators.

It essentially works by maintaining the voltage difference between the anode and cathode to be a fixed value, determined by the internal reference. When the input voltage exceeds this reference value, the device starts conducting to clamp the voltage and provide a regulated output.

FAQ Section (20 Common Questions and Answers)

What is the TLV431AIDBZR used for? The TLV431AIDBZR is used as a voltage reference for creating stable reference voltages in precision circuits, such as ADCs or DACs. What is the supply voltage range for TLV431AIDBZR? The TLV431AIDBZR operates within a supply voltage range of 2.495V to 40V. What is the output voltage of TLV431AIDBZR? The TLV431AIDBZR provides a 3.0V reference output when configured as a voltage regulator. What is the accuracy of the TLV431AIDBZR? The accuracy of the TLV431AIDBZR is ±1.0% at 25°C. What is the pinout for TLV431AIDBZR? The TLV431AIDBZR has a 5-pin SOT-23 package, with pins for anode (A), cathode (K), reference (R), ground (GND), and a not-connected pin (N.C.). What is the maximum output current of TLV431AIDBZR? The TLV431AIDBZR can provide a maximum output current of 5mA. What is the reference voltage of TLV431AIDBZR? The reference voltage of the TLV431AIDBZR is 2.495V (typical value). How do I configure TLV431AIDBZR for a different output voltage? The TLV431AIDBZR can be configured with a resistor network to set the output voltage. The output voltage depends on the external resistors placed between the reference and cathode pins. What is the typical application for TLV431AIDBZR? The TLV431AIDBZR is used in precision voltage regulation, reference voltage generation, and supply systems requiring stable voltage outputs.

What is the power consumption of the TLV431AIDBZR?

The TLV431AIDBZR has a typical power consumption of 2.5mW.

What is the temperature range for TLV431AIDBZR?

The TLV431AIDBZR operates within a temperature range of -40°C to 125°C.

What is the tolerance of TLV431AIDBZR’s output voltage?

The TLV431AIDBZR has a tolerance of ±1.0% for the reference voltage output.

Can I use TLV431AIDBZR for high-current applications?

No, the TLV431AIDBZR is not designed for high-current applications. It provides a maximum output current of 5mA.

How does TLV431AIDBZR maintain voltage regulation?

The device uses shunt regulation to keep the output voltage stable, by adjusting the current flow between the anode and cathode when the input voltage rises above the reference.

How do I connect TLV431AIDBZR to a circuit?

Connect the anode pin (A) to the input voltage, the cathode pin (K) to the output, and the reference pin (R) to a resistor network to set the reference voltage.

What is the minimum operating voltage for TLV431AIDBZR?

The TLV431AIDBZR requires a minimum operating voltage of 2.495V.

Is the TLV431AIDBZR suitable for battery-powered devices?

Yes, because it has low power consumption and operates with voltages as low as 2.495V, making it suitable for battery-powered devices.

What is the typical output current drive of TLV431AIDBZR?

The TLV431AIDBZR can drive up to 5mA of output current.

What should be the value of the external resistors in the TLV431AIDBZR circuit?

The external resistor values should be chosen to create the desired output voltage according to the application. Typically, a resistor divider is used between the reference and cathode pins.

Can I use the TLV431AIDBZR in place of an op-amp?

No, the TLV431AIDBZR is a voltage reference device, not an operational amplifier (op-amp). It is designed specifically for reference voltage regulation.

Conclusion:

The TLV431AIDBZR is a precision voltage reference from Texas Instruments in a 5-pin SOT-23 package. It is ideal for applications requiring a stable, accurate voltage reference. It features a reference voltage of 2.495V, operates at low power, and can be used in various analog circuits that need precise voltage regulation. The FAQ section answers common questions that can help in understanding the device’s functionality, usage, and limitations.

Let me know if you need further clarification or additional details!

IC Clouds | Leading innovation platform for electronic technology, providing comprehensive IC application and design resources

icclouds

Anonymous